Corporate training solution - Web brochure
Construction Crews Need
Technical, Short, & Validated
Corporate Training
Construction projects rely on a system of delegation. Tasks are divided among sub-contractors who are responsible for completing their own work. Sub-contractors have to complete work to specification and pick up on their own mistakes and rectify them by themselves.
Obviously, this system of delegation creates risks.Â
It’s possible for mistakes to be made by sub-contractors at all stages of a construction project. That’s why it’s so important for main contractors to ensure that the work on their projects is fully supervised by a competent site crew.
The question is, how can the main contractor make sure that works requiring a high level of technical knowledge are properly supervised by their staff?Â
We have a solution.
Why we are different, No. 1
Let the crew Learn
'At the moment',
not later.
There is no time to learn later on-site. The site crew must learn NOW. Our solution automatically detects and highlights key technical terms from any documents they upload. Upon clicking, it provides relevant learning materials immediately.
Why we are different, No. 2
Let the crew Learn
'technical' contents,
not general stuff.
Construction crews need to supervise subcontractors, and it requires specific technical knowledge, not general ones. Our content can equip the crews with technical literacy in 4 risky areas, so they can manage subcontractors confidently.
Why we are different, No. 3
Let crew Learn
'in a few minutes',
not hours.
The construction crew cannot sit and learn for hours as they need to be on-site. Therefore, all our content is in microlearning format, consisting of bite-sized modules that would only take 5-10 minutes to complete.
Why we are different, No. 4
Let the crew Learn
the contents
'validated by the industry.'
We understand that nothing is more crucial than ensuring the technical contents for the construction crew are fully reviewed and validated by industry professionals. All our contents have undergone a rigorous validation process, conducted multiple times by industry experts.
what our clients have to say
"The competencies of the people within our industry is an integral ingredient in the delivery of a Quality product and Teletraining provide a set of detailed and interactive modules which are of benefit to all levels of experience relevant to the subject matter. The modules are presented by seasoned professionals and attendees benefit from access to a wealth of reference material for ongoing support."
Andrew HarrisonHead of Quality at Lendlease 
Over 500 Five-star reviews
Technical knowledge is an essential aspect of any workforce, especially in construction and infrastructure development. In Australia, site crew are responsible for executing complex projects, and their technical knowledge plays a crucial role in the success of the project. In recent years, there has been a growing emphasis on providing technical training to site crews to improve their knowledge and skills.
We, as a technical training provider in Australia, have been delivering training to site crews for the past seven years. During this time, we have accumulated a vast amount of data on the technical knowledge levels of site crews before and after the training. Our aim was to assess the effectiveness of the training and identify any areas that require improvement.
Courses are comprehensive and engaging, they are thoroughly researched and accurate, inclusive of both design and installation considerations.
AdinaBusiness Development Lead @ Laing O’Rourke
Very informative, concise and practical for any persons involved with the construction projects.
JohnSenior Project Engineer @ Lendlease
Very useful with real world examples and solutions
that apply directly to construction.
KevinSite Engineer @ Hansen Yuncken
Corporate Training Solutions
Subscription
(+AI feature)
The yearly corporate subscription offers competitive discount rates for all courses with unlimited access to our AI feature. Additionally, you benefit from receiving course updates that reflect the latest industry practices.
Individual Course Purchase
You can buy individual courses for your team, which come with powerful progress reporting and admin functions, valid for a year of access. Discount rates will be offered depending on your team size.
Course Development
Engage us to develop technical training courses for your team. Our team of proven professionals in the Construction Industry will deliver the most practical and innovative courses.
Contents Coverage Outline
Foundation Courses
Introductory-level contents are designed to provide construction crews with a fundamental understanding that could be added to your company's existing graduate programs.
Introduction to Concrete Structure
4 hours of 30 short videos, written material, infographics, site photos, VR tour, quizzes
A$ 320 + GST
- What are the construction stages of a concrete building?
- What are the temporary works and why are they used?
- What are different types of concrete formwork?
- What are the construction steps of a suspended post tensioned slab?
- What is concrete material and its components?
- What are the main properties of the concrete material?
- What are the main site activities during the concrete pour day?
- What is steel reinforcement rebar and its properties?
- What are the different types of steel rebar and their application?
- What is Post Tensioning (PT) and its types?
- What are the installation steps for a mono-strand PT tendon?
- What is precast and its benefits and drawbacks?
- What is the precast installation steps for a wall/column panel?
- What are the installation steps for the precast wall/column?
- How do we read a concrete profile, steel rebar, post tensioning and precast drawing?
Introduction to Steel Structure
4 hours of 30 short videos, written material, infographics, site photos, quizzes
A$ 320 + GST
- What is steel design, manufacture, fabrication process?
- What is steel construction category?
- What are steel material advantages and disadvantages?
- What are the different types of steel structures?
- What is a steel column/beam/truss/bracing/purlin member and its types and sections?
- What are the different type of bolts, sizes and their properties?
- What are the bolted connection components and their types? (Washer, Nuts and Bolt Holes)
- What are the different bolt fastening and tensioning methods and how to do?
- What is welding and its key considerations?
- What are the different welding methods?
- What is weld size and how do we specify a weld type?
- What are the different non-destructive examinations?
- What is AESS and its different categories?
- What are the different steel corrosion & Fire protection methods?
- How do we read steel connection drawings and detailing?
Introduction to Waterproofing
3 hours of 30 short videos, written material, infographics, site photos, quizzes
A$ 320 + GST
- What is a waterproofing system and why do we need it?
- What are the installation steps for a waterproofing membrane?
- What are the different types of waterproofing membranes and their application?
- How does the substrate material impact the design, application, and performance of a waterproofing system?
- What factors would impact the design of the waterproofing system?
- What are the different building types and location factors that can impact the waterproofing design?
- What are the different area types & locations that would impact the waterproofing design?
- How are the area geometry and joints, which could impact waterproofing system?
- How are services and their properties going to impact the waterproofing systems?”
- How are adjoining elements and their properties will impact the waterproofing system?”
- How do the Substrate Finishing Properties impact the design of a waterproofing system?
- Â
- What are the design approach for a waterproofing system and the related codes and standards used in Australia?
Introduction to Ground Works
3 hours of 30 short videos, written material, infographics, site photos, VR tour, quizzes
A$ 300 + GST
- What are the Various Construction Stages of the Ground Works?
- What are Preparation Works before Starting Groundworks?
- What is a Geotechnical Report and How to Interpret it?
- What is a Retaining Wall and its Different Types?
- What are the Different Embedded Retaining Wall types?
- What are the Adv. & Disadv. of Various Embedded Retaining Walls?
- What are the Different Types of Non-Embedded Retaining Walls?
- What is Earthwork and its different Steps?
- What are preparation works before starting earthworks?
- What is a Blinding Layer, Geotextile Fabric, and Vapour Barrier?
- What is a Foundation and its Different Types?
- What are the Different types of Deep Foundations?
- How do We Read Embedded Retaining Wall Drawings?
- How do We Read Non-Embedded Retaining Wall Drawings?
- How do we Read Various Foundation Drawings?
- What is a Slab on Ground and its Types?
- How do we Read Slab on Ground Drawings?
Advanced Courses
Advanced contents are designed to provide construction crews with the core skills and knowledge necessary, suitable for site engineers, project engineers, project managers, and others in similar roles.
Category: Concrete Structure
Concrete Mix & Placement
2 hours of 15 videos, written material, infographics, site photos, VR tour, quizzes
A$ 150 + GST
- What is a concrete mix and its key properties?
- What do we need to check in a concrete mix design?
- What is concrete green star rating and its key considerations?
- Why do we do slump test and its requirements?
- Can we add water on site before pumping concrete?
- Why is concrete vibration required and the right and wrong practices on site?
- Why is concrete curing necessary and its different methods?
- What are the main checks when using a curing compound?
- What are the different classification of concrete finishes for formed and unformed surfaces?
- What are the different types of the concrete finishes for an unformed surface?
- Â
- How does concrete gain strength over time?
- What is a puddle pour and its challenges on site?
Category: Concrete Structure
Shrinkage & Movement Joint
2 hours of 15 videos, written material, infographics, site photos, VR tour, quizzes
A$ 150 + GST
- What is concrete shrinkage and its different types?
- How do we avoid/reduce plastic shrinkage cracks?
- How do we avoid/control early-age drying shrinkage cracks?
- How do we avoid/control standard drying shrinkage cracks?
- What is a steel mesh and how does it help with controlling shrinkage cracks?
- What is a movement joint and its different types?
- What are the requirements when locating TMJ or PMJ?
- What are the different types of TMJ and PMJ? connector?
- What are the installation steps and risks for a sleeved dowel?
- What are the installation steps and risks for a pour strip?
- What are the installation steps and risks for a lockable dowel?
- What are the installation steps and risks for a corbel connection?
- Why do we need to avoid an underside corbel?
- What are the installation steps and risks for a shear connector?
Category: Concrete Structure
Steel Reinforcement
2 hours of 15 videos, written material, infographics, site photos, VR tour, quizzes
A$ 150 + GST
- Why and where is steel rebar used inside concrete?
- Why are bar splice, lapping, cogging, layering required?
- What is the difference between bending and punching shear?
- What is a stud rail for and its installation risks on site?
- How do we read and extract critical info from a rebar drawing?
- What are the different types of construction joints?
- What is a threadsure connection and what to check on site?
- What is a bar coupler connection and what to check onsite?
- What is a keybox/pull out bar connection and what to check on site?
- What is a bend up bar connection and what to check on site?
- Why is a bar cover required and how is it ensured on site?
- What are the critical checks when doing a drill & epoxy detailing?
- What are the common construction issues around steel rebar installation on site?
- Why and where is steel rebar used inside concrete?
- Why are bar splice, lapping, cogging, layering required?
- What is the difference between bending and punching shear?
- What is a stud rail for and its installation risks on site?
- How do we read and extract critical info from a rebar drawing?
- What are the different types of construction joints?
- What is a threadsure connection and what to check on site?
- What is a bar coupler connection and what to check onsite?
- What is a keybox/pull out bar connection and what to check on site?
- What is a bend up bar connection and what to check on site?
- Why is a bar cover required and how is it ensured on site?
- What are the critical checks when doing a drill & epoxy detailing?
- What are the common construction issues around steel rebar installation on site?
- Why and where is steel rebar used inside concrete?
- Why are bar splice, lapping, cogging, layering required?
- What is the difference between bending and punching shear?
- What is a stud rail for and its installation risks on site?
- How do we read and extract critical info from a rebar drawing?
- What are the different types of construction joints?
- What is a threadsure connection and what to check on site?
- What is a bar coupler connection and what to check onsite?
- What is a keybox/pull out bar connection and what to check on site?
- What is a bend up bar connection and what to check on site?
- Why is a bar cover required and how is it ensured on site?
- What are the critical checks when doing a drill & epoxy detailing?
- What are the common construction issues around steel rebar installation on site?
Category: Concrete Structure
Post - Tensioning
2 hours of 15 videos, written material, infographics, site photos, VR tour, quizzes
A$ 150 + GST
- How does post tensioning work?
- What are construction steps for a PT system with flat duct?
- What benefits does post tensioning system offer?
- What are the components of a post tensioning tendon?
- What is a tendon anchorage zone and its risks on site?
- Why is a helix/anti burst reo used at both dead and stressing ends?
- What is a pan stressing and reason for pan trimmer bars?
- Why is PT stressing completed in 2 stages of initial & final?
- Why are strand extensions measured?
- Why is PT tendon grouting required?
- What are the various types of edge bars in a suspended PT slab?
- How do we read a post tensioning drawing?
- What are the common construction issues around PT tendon installation?
Category: Concrete Structure
Precast Concrete & Column
2 hours of 15 videos, written material, infographics, site photos, VR tour, quizzes
A$ 150 + GST
- What are the installation steps for a precast wall/column?
- What are the checks when positioning & securing the precast starter dowels inside in-situ slab?
- What are the checks for crane driving and lifting?
- What is precast lifting point and its potential risks?
- Why is precast horizontal joint grouting required?
- What are load-bearing and non-load bearing precast panels?
- What are pre-install and post-install grouting practices?
- Why are 2 temporary bracings required for a precast column/ wall and their requirements?
- Why is it critical to grout the precast dowels correctly & on time?
- What are the various precast connections to the future slab above and their risks?
- What is a wet-joint and a stitch plate connection?
- Why do we detail steps across the horizontal joint for external panels?
- What are the common practices to waterproof the vertical joints in between panels?
- What are the common failure examples around precast installation on site?
Category: Concrete Structure
Concrete Defects & Cracks
2 hours of 15 videos, written material, infographics, site photos, VR tour, quizzes
A$ 150 + GST
- What are the different types of concrete structural cracks?
- What are the different types of concrete non-structural cracks?
- How do we distinguish structural cracks from non-structural ones?
- What are the reasons for following concrete defects, how to avoid and repair them if they occur:
– Honeycombing
– Edge Spalling
– Colour Variation
– Efflorescence
– Dusting & Rain Damage
– PT Anchorage Bursting - What is a cold joint and its potential risks?
Category: Steel Structure
Steel Manufacture & Fabrication
4 hours of 30 videos, written material, infographics, site photos, quizzes
A$ 290 + GST
- What is steel design & manufacture & fabrication process?
- What are the Australian codes related to steel structures design & fabrication & installation?
- What are the key considerations during design coordination?
- What is hot-rolled and cold form process?
- What type of certification are required for steel manufacture?
- How does fabrication process differ for each CC?
- What are the welding requirements related to different CC?
- What are key checklist and certification for steel fabrication?
- What are various weld imperfections, their causes & cures?
- What are the permissible tolerances for weld imperfections?
- What are the different weld inspection methods?
- What are the different steel treatment grades?
- What is AESS and its different types?
- What are the characteristics of different AESS?
- What are the different steel exposure classification?
- What is steel corrosion protection and its different methods and their applications?
- What are the various steel fire protection methods and their requirements?
Category: Steel Structure
Steel Frame Installation
4 hours of 30 videos, written material, infographics, site photos, quizzes
A$ 290 + GST
- What are the key steps and checklists for the erection of a steel structure?
- How do we transport steel to site and their limitations?
- What are the key steps when installing a base column?
- What are the potential issues when installing a base column?
- What are the potential issues with different type of a beam to column and beam to beam connections?
- What are the key steps when installing a steel bracing?
- What are the potential issues with a steel bracing installation?
- What are the key steps when installing a steel truss?
- What are the different types of a truss member connections?
- What are the potential issues with truss installation??
- What are the key steps when installing a purlin?
- What are the potential issues with a purlin installation?
- What are the key steps when installing a metal sheet?
- What are the potential issues with a metal sheet installation?
Category: Steel Structure
Steel Composite Slab
2 hours of 15 videos, written material, infographics, site photos, quizzes
A$ 140 + GST
- What is a composite slab and why is it used?
- How does a composite slab work structurally?
- What are the steps in installing a composite slab?
- What are the checks for primary beam connections?
- What are the checks for secondary beam connections?
- What are the bearing requirements when installing a metal deck?
- What are the different types of metal decks?
- What are the issues with metal deck installation?
- What are shear connectors and why are they used?
- What are the different types of stud?
- What are the installation requirements for shear studs?
- What are the issues with shear stud installation?
- What is a stud mesh and why is it used?
- What are the issues with stud mesh installation?
- What are the requirements when installing slab reinforcement in a composite slab?
- What are the potential issues with slab rebar installation?
- What are the requirements for concrete slab?
- How do we read composite slab drawings?
- Why are movement joint used in a composite slab and their types?
- What are the potential issues with a movement joint in a composite slab?
Category: Steel Structure
Steel to Concrete Fixing
2 hours of 15 videos, written material, infographics, site photos, quizzes
A$ 140 + GST
- Where do we use steel to concrete fixings?
- What are the different steel to concrete fixing options?
- What certification we need to collect for post-installed / chemical fasteners?
- What are the selection criteria for post installed fasteners?
- What are the potential shear failures for post installed fasteners?
- What are key installation steps for post-installed chemical fasteners?
- What are the key checks when drilling anchor bolt holes?
- What are the different drilling methods and their application?
- Why is cleaning hole critical?
- What are the key checks when injecting epoxy to holes?
- What are the potential checks when inserting rebar?
- What are the steps and checks when grouting the steel beam end plate connection?
- What are post installed mechanical fasteners and how do they work?
- How do mechanical fasteners work structurally and how do they fail?
- What are the different types of post installed mechanical fasteners?
- What are the installation steps for post installed fasteners?
- How much is hole clearance in a fixture?
- Why do we need to do anchor pull out test and methods?
- What are the potential issues with post-installed fasteners?
- What are the detailing requirement for through bolts?
- What are the detailing requirement for through bolts?
- What are the detailing requirement for hanger through bolts?
- What are the potential issues with over-head connections?
Category: Ground Works
Earthworks
2 hours of 15 videos, written material, infographics, site photos, quizzes
A$ 200 + GST
- What is the subgrade and its construction steps?
- What are the potential issues when preparing the subgrade?
- What are the various layers of earthwork placed above the subgrade?
- What are the different fill materials for the base and subbase layers?
- What factor primarily influences the selection of fill layer thickness?
- What are the different fill types?
- What is a controlled fill and its common types?
- What are the different compaction methods and their issues?
- What are the primary factors that impact soil compaction levels?
- How do we assess the quality and workmanship of the earthwork?
- What potential problems may arise during stockpiling?
- What is a working platform and its requirements?Â
- How do we interpret an earthwork drawing?
